Fiddes Tinted Hard Wax Oil
Tinted Hard Wax Oil has the same features and qualities as Fiddes Hard Wax Oil and comes in stylish pre-tinted colors. The wide colour range is designed to compliment any home or lifestyle.
The range has been formulated over the years in consultation with interior designers and architects and is revised on a regular basis to ensure the colours are in line with market trends. Application methods can vary the depth of colour achieved. All colours can be mixed together or mixed with the clear Hard Wax Oil to dilute the strength of the tint, offering a unique opportunity to create your own customised colour and eliminating the need to stain. The Fiddes team are available to assist in colour matching or mixing.
Sizes: 250ml, 1lt, 2.5lt, and 20lt. *Contact us for availability of 20lt drums.
Check out StopLoss Bags for the perfect solution to keeping your left over product fresh.
Key benefits of Fiddes Hard Wax Oil:
Clear available in 4 Sheen levels – Matt, Silk, Satin and Gloss
Pre-Tinted range in 12 colours
Customisable – Tinted colours can be mixed together or with the clear
Suitable for all internal timber e.g., floors, kitchen bench tops, furniture, doors & joinery
Suitable for any porous surface e.g., Concrete, cork, stone etc.
Quick Drying (under 4 hours in correct conditions – fully cured in 7 days)
Highly Durable – More durable than buffed in HWO’s and no need to add additional hardeners
Replenishable – if maintained correctly, no need to re-sand before applying maintenance coats
Easy to Maintain- Simply use Fiddes Wood Floor Cleaner as required
Suitable for application onto children’s toys – EN 71 – Toy Safety Test
Water Resistant: Tested in accordance with BS 3900 G5
Resistant to wear: Tested in accordance with BS 3900 EI5
Slip Resistant rating of R11 out of the tin – no need to add anything
Easy to use – clear HWO simply rolled on using a short nap roller (see application instructions and YouTube Videos for further details)
No need for special Maintenance Oils
Excellent coverage rate – approx. 20 – 24sqm per litre
Does not react with silicone or putty
Non yellowing
Anti-Static
Preparation
Ensure all surfaces are clean, dry and free from previous finish. Minor gaps and holes can be filled with Fiddes Filler Gel if required. Sand the substrate with a fine 120-150 grade sandpaper. Ensure the surface is clean and remove all traces of dust prior to application.
Application
Ensure all areas to be coated are extremely well ventilated during and after application and always test on a small area prior to use. No sealer or primer is required. Stir contents thoroughly before and during use. Maximum 2 coats recommended. Clean applicators with White Spirits.
Floors
Apply with a brush, trowel or a floor applicator and buff in with a TAN or BEIGE floor pad using a slow speed buffing machine (175 RPM) whilst ragging edges working the product across the floor. Once dry, apply a coat of clear Hard Wax Oil using a short nap microfibre roller. Alternatively, to achieve a similar look without using a buffing machine mix 10% Tinted HWO with clear HWO and roll on using a short nap microfibre roller.
You can also roll the Tinted HWO straight using a short nap microfibre roller being extremely careful not to overlap and to leave roller stop marks.
Furniture
Brush or roll the Tinted Hard Wax Oil and then using a rag, buff into the surface ensuring the entire surface has been covered. Once dry, apply a coat of clear Hard Wax Oil using a short nap microfibre roller. Alternatively, see above instructions to mix Tinted with Clear Hard Wax Oil.
Additional notes
*When applied using the above methods the Tinted Hard Wax Oil is more of a transparent tint. If the project requires a deeper colour we recommend using a direct stain such as Fiddes Nitro or Light Fast Water Stain before applying a Clear Hard Wax Oil as per instructions.
*Depending on the timber substrate, to achieve a close to raw freshly sanded look, we recommend a coat of White Tinted Hard Wax Oil buffed in, followed by a coat of Clear Hard Wax Oil.
*Always do a test patch first and ensure the substrate is prepared in the same process as the project will be completed.
Tinted Hard Wax Oil has the same features and qualities as Fiddes Hard Wax Oil and comes in stylish pre-tinted colors. The wide colour range is designed to compliment any home or lifestyle.
The range has been formulated over the years in consultation with interior designers and architects and is revised on a regular basis to ensure the colours are in line with market trends. Application methods can vary the depth of colour achieved. All colours can be mixed together or mixed with the clear Hard Wax Oil to dilute the strength of the tint, offering a unique opportunity to create your own customised colour and eliminating the need to stain. The Fiddes team are available to assist in colour matching or mixing.
Sizes: 250ml, 1lt, 2.5lt, and 20lt. *Contact us for availability of 20lt drums.
Check out StopLoss Bags for the perfect solution to keeping your left over product fresh.
Key benefits of Fiddes Hard Wax Oil:
Clear available in 4 Sheen levels – Matt, Silk, Satin and Gloss
Pre-Tinted range in 12 colours
Customisable – Tinted colours can be mixed together or with the clear
Suitable for all internal timber e.g., floors, kitchen bench tops, furniture, doors & joinery
Suitable for any porous surface e.g., Concrete, cork, stone etc.
Quick Drying (under 4 hours in correct conditions – fully cured in 7 days)
Highly Durable – More durable than buffed in HWO’s and no need to add additional hardeners
Replenishable – if maintained correctly, no need to re-sand before applying maintenance coats
Easy to Maintain- Simply use Fiddes Wood Floor Cleaner as required
Suitable for application onto children’s toys – EN 71 – Toy Safety Test
Water Resistant: Tested in accordance with BS 3900 G5
Resistant to wear: Tested in accordance with BS 3900 EI5
Slip Resistant rating of R11 out of the tin – no need to add anything
Easy to use – clear HWO simply rolled on using a short nap roller (see application instructions and YouTube Videos for further details)
No need for special Maintenance Oils
Excellent coverage rate – approx. 20 – 24sqm per litre
Does not react with silicone or putty
Non yellowing
Anti-Static
Preparation
Ensure all surfaces are clean, dry and free from previous finish. Minor gaps and holes can be filled with Fiddes Filler Gel if required. Sand the substrate with a fine 120-150 grade sandpaper. Ensure the surface is clean and remove all traces of dust prior to application.
Application
Ensure all areas to be coated are extremely well ventilated during and after application and always test on a small area prior to use. No sealer or primer is required. Stir contents thoroughly before and during use. Maximum 2 coats recommended. Clean applicators with White Spirits.
Floors
Apply with a brush, trowel or a floor applicator and buff in with a TAN or BEIGE floor pad using a slow speed buffing machine (175 RPM) whilst ragging edges working the product across the floor. Once dry, apply a coat of clear Hard Wax Oil using a short nap microfibre roller. Alternatively, to achieve a similar look without using a buffing machine mix 10% Tinted HWO with clear HWO and roll on using a short nap microfibre roller.
You can also roll the Tinted HWO straight using a short nap microfibre roller being extremely careful not to overlap and to leave roller stop marks.
Furniture
Brush or roll the Tinted Hard Wax Oil and then using a rag, buff into the surface ensuring the entire surface has been covered. Once dry, apply a coat of clear Hard Wax Oil using a short nap microfibre roller. Alternatively, see above instructions to mix Tinted with Clear Hard Wax Oil.
Additional notes
*When applied using the above methods the Tinted Hard Wax Oil is more of a transparent tint. If the project requires a deeper colour we recommend using a direct stain such as Fiddes Nitro or Light Fast Water Stain before applying a Clear Hard Wax Oil as per instructions.
*Depending on the timber substrate, to achieve a close to raw freshly sanded look, we recommend a coat of White Tinted Hard Wax Oil buffed in, followed by a coat of Clear Hard Wax Oil.
*Always do a test patch first and ensure the substrate is prepared in the same process as the project will be completed.
Tinted Hard Wax Oil has the same features and qualities as Fiddes Hard Wax Oil and comes in stylish pre-tinted colors. The wide colour range is designed to compliment any home or lifestyle.
The range has been formulated over the years in consultation with interior designers and architects and is revised on a regular basis to ensure the colours are in line with market trends. Application methods can vary the depth of colour achieved. All colours can be mixed together or mixed with the clear Hard Wax Oil to dilute the strength of the tint, offering a unique opportunity to create your own customised colour and eliminating the need to stain. The Fiddes team are available to assist in colour matching or mixing.
Sizes: 250ml, 1lt, 2.5lt, and 20lt. *Contact us for availability of 20lt drums.
Check out StopLoss Bags for the perfect solution to keeping your left over product fresh.
Key benefits of Fiddes Hard Wax Oil:
Clear available in 4 Sheen levels – Matt, Silk, Satin and Gloss
Pre-Tinted range in 12 colours
Customisable – Tinted colours can be mixed together or with the clear
Suitable for all internal timber e.g., floors, kitchen bench tops, furniture, doors & joinery
Suitable for any porous surface e.g., Concrete, cork, stone etc.
Quick Drying (under 4 hours in correct conditions – fully cured in 7 days)
Highly Durable – More durable than buffed in HWO’s and no need to add additional hardeners
Replenishable – if maintained correctly, no need to re-sand before applying maintenance coats
Easy to Maintain- Simply use Fiddes Wood Floor Cleaner as required
Suitable for application onto children’s toys – EN 71 – Toy Safety Test
Water Resistant: Tested in accordance with BS 3900 G5
Resistant to wear: Tested in accordance with BS 3900 EI5
Slip Resistant rating of R11 out of the tin – no need to add anything
Easy to use – clear HWO simply rolled on using a short nap roller (see application instructions and YouTube Videos for further details)
No need for special Maintenance Oils
Excellent coverage rate – approx. 20 – 24sqm per litre
Does not react with silicone or putty
Non yellowing
Anti-Static
Preparation
Ensure all surfaces are clean, dry and free from previous finish. Minor gaps and holes can be filled with Fiddes Filler Gel if required. Sand the substrate with a fine 120-150 grade sandpaper. Ensure the surface is clean and remove all traces of dust prior to application.
Application
Ensure all areas to be coated are extremely well ventilated during and after application and always test on a small area prior to use. No sealer or primer is required. Stir contents thoroughly before and during use. Maximum 2 coats recommended. Clean applicators with White Spirits.
Floors
Apply with a brush, trowel or a floor applicator and buff in with a TAN or BEIGE floor pad using a slow speed buffing machine (175 RPM) whilst ragging edges working the product across the floor. Once dry, apply a coat of clear Hard Wax Oil using a short nap microfibre roller. Alternatively, to achieve a similar look without using a buffing machine mix 10% Tinted HWO with clear HWO and roll on using a short nap microfibre roller.
You can also roll the Tinted HWO straight using a short nap microfibre roller being extremely careful not to overlap and to leave roller stop marks.
Furniture
Brush or roll the Tinted Hard Wax Oil and then using a rag, buff into the surface ensuring the entire surface has been covered. Once dry, apply a coat of clear Hard Wax Oil using a short nap microfibre roller. Alternatively, see above instructions to mix Tinted with Clear Hard Wax Oil.
Additional notes
*When applied using the above methods the Tinted Hard Wax Oil is more of a transparent tint. If the project requires a deeper colour we recommend using a direct stain such as Fiddes Nitro or Light Fast Water Stain before applying a Clear Hard Wax Oil as per instructions.
*Depending on the timber substrate, to achieve a close to raw freshly sanded look, we recommend a coat of White Tinted Hard Wax Oil buffed in, followed by a coat of Clear Hard Wax Oil.
*Always do a test patch first and ensure the substrate is prepared in the same process as the project will be completed.